Hunting down Senator Muppy Doo in High on Life 2 sends you through one of the game’s most chaotic sequences: PoolCon, RailCon, and finally HumanCon. This section mixes fast parkour, Sheath’s Spike connections, Lugblob puzzles, and tight enemy encounters. If you miss a step, you fall, restart, and try again.
This guide walks you through every platforming puzzle and power connection so you can move smoothly from MurderCon all the way to the HumanCon boss fight — without getting stuck.
How to Navigate PoolCon in High on Life 2
After defeating Brutus in MurderCon, head toward the large PoolCon billboards directly ahead.
Step 1: Use Your Skateboard and Double Jump
Jump onto the floating rails and activate your skateboard. Glide across billboards and suspended platforms. Stay centered on narrow paths to avoid slipping off.
You’ll eventually reach a circular platform with a rail wrapping around it.
Step 2: Use the Balloon Jump Pad
As you circle the railing, look for a human head balloon floating nearby.
Jump toward it and bounce upward to reach the higher platform.
Clear out the enemies on the surrounding floating platforms before moving forward. They will interrupt your parkour if you leave them alive.
How to Solve the PoolCon Generator Puzzle
Now you must power a junction to reach RailCon.
Step 1: Locate the Generator
Scan the smaller nearby platform to find a hidden generator.
Use Gus’s suction ability to flip the panel and reveal it.
Step 2: Use Sheath’s Spike
Switch to Sheath and fire Spike at the generator.
Turn around and locate the floating junction across from it.
Stand on nearby crates to gain range and connect Spike from the generator to the junction.
This creates a zipline.
Step 3: Ride the Zipline
Use your grapple and skateboard across the newly formed connection.
This takes you to the next large circular platform — the entrance route toward HumanCon via RailCon.
How to Navigate RailCon in High on Life 2
RailCon increases the difficulty with tighter paths and more hazards.
What You Need to Do:
- Wall run across narrow surfaces
- Jump between floating rails
- Avoid traps and enemy fire
- Maintain momentum
Do not rush jumps. Time them carefully, especially during rail transitions. If you lose speed mid-air, you will fall and restart the section.
At the end of this sequence, you will reach another circular platform that overlooks HumanCon.
How to Enter HumanCon in High on Life 2
You now face a multi-step Spike puzzle involving a Lugblob and multiple power connections.
Step 1: Power the Ice Cream Truck Breaker Box
On the circular platform, you will find:
- A generator
- A breaker box on an ice cream truck
- A Lugblob inside a metal container
Pick up the Lugblob and place it between the generator and breaker box so both remain in line of sight.
Connect:
- Generator → Lugblob
- Lugblob → Breaker box
This activates a second generator behind the truck.
Step 2: Create a Zipline to the Balloons
Fire Spike from the newly powered generator.
Locate the floating receiver near the human-shaped balloons.
Connect them to create another zipline.
Ride it.
Step 3: Cross the Human Balloons
This section requires precise timing.
Jump from balloon head to balloon head.
Use double jump to stabilize mid-air.
At the final balloon, land on the backside of the baby-shaped balloon. It launches you directly into HumanCon.
How to Open the HumanCon Entrance
HumanCon appears closed when you arrive. You must solve one final Spike puzzle.
You Need:
- One generator near the stairs
- A Lugblob on a tall column
- Two rotating advertisement junctions
- A breaker box requiring three charges
Step-by-Step Solution:
- Shoot the rotating ads so their junctions face the entrance.
- Fire Spike from the generator to both junctions.
- Use Gus’s suction to pull down the Lugblob.
- Place the Lugblob between the second junction and breaker box.
- Connect:
- Second junction → Lugblob
- Lugblob → Breaker box
This completes the circuit and forces the HumanCon doors open.
High on Life 2 Platforming Tips
- Always clear enemies before solving puzzles.
- Use Scan frequently to locate generators and junctions.
- Keep Lugblobs centered so connections don’t break.
- Use Time Bubble if overwhelmed during combat transitions.
- Do not spam jumps — control your momentum.
Once inside HumanCon, you trigger the boss battle against Senator Muppy Doo. The fight unfolds in multiple phases and even breaks the fourth wall.
If you struggled with the platforming, take a breath — the real chaos begins inside. Play Now!
