The Fix the Super Crane quest blocks progression through the Aburrey Quarry and introduces several environmental puzzles, crane controls, and traversal mechanics. This guide walks you through every step you need to take—where you move the lifting cage, which devices you activate, and how you position the crane—so you can restore power, clear the quarry, and open the path to the Deep Management Post in Arknight Endfield without wasting time.
How the Quest Unlocks
The quest unlocks automatically after completing the Quarry Rescue side mission. Once active, the objective directs attention to the damaged Super Crane inside Aburrey Quarry. The crane powers multiple routes, so repairing it becomes mandatory to continue exploration.
How to Start Fix the Super Crane in Arknights Endfield
Start inside the control room and interact with the Super Crane Power Nexus at the back.
The interface shows that one component is missing. Exit the panel and speak with Ramon to confirm that the repair cannot continue yet. The quest then shifts toward locating the missing data and restoring crane access.
Move the Lifting Cage to Reach the Archive
Return to the crane controls and activate the Lifting Cage.
Move the cargo forward to cross the gap and exit onto the quarry platforms. Follow the quest marker toward the Archive, clearing enemies only when they block control panels or terminals.
Create a Path Using Crane Lifter Terminals
At the Crane Lifter Terminal:
- Rotate the platform until it faces north.
- On the next terminal, activate it once to slide the platform left.
- Continue upward until enemies ambush an NPC.
Defeat the enemies to trigger a short cutscene, then follow the NPC deeper toward the Archive entrance.
Disable the Archive Security Gate
A high-voltage barrier blocks entry to the Archive.
Strike the nearby Reacting Devices to temporarily disable the electric fence. Timing matters, so move quickly through the gate once the barrier drops.
Solve the Reacting Device Sequence Puzzle
Inside the Archive access area, four Reacting Devices block the final gate.
Read the notice board near the devices, then check the painted markings on the wall. The correct activation order follows the P-4231 code.
Correct order:
- Device 4
- Device 2
- Device 3
- Device 1
Activating the devices in this sequence unlocks the Archive door.
Retrieve the Archive Data
Enter the Archive and interact with the floating document terminal above the table.
This action records the required data automatically. Once collected, retrace the route back to the Lifter Central using platforms, ropes, and elevators.
Repair the Super Crane Power Nexus
Return to the Power Nexus panel in the control room.
Complete the circuit placement puzzle by fitting components into the grid correctly. Once the system powers up, the Super Crane becomes fully operational.
Redirect the Lifting Cage Toward the Quarry Site
Activate the control switch to turn the lifting cage right, then move it forward.
Exit at the Quarry Site and prepare for extended traversal using pylons, jump pads, and temporary bridges.
Activate Bridges and Jump Pads in the Quarry
Strike nearby Reacting Devices to trigger environmental tools:
- One device creates a bridge back toward the crane controls.
- Another activates jump pads on nearby rocks.
Use these tools to climb higher platforms and advance deeper into the quarry.
Reach Penny’s Camp
Approach the elevated platforms using either:
- A direct jump sequence across gaps, or
- A safer route that drops down and uses a rope to climb back up.
A cutscene introduces Penny, who becomes the guide for the next section.
Follow Penny and Unlock the Crane Arm Route
After leaving Penny’s camp:
- Drop into the narrow gap on the right.
- Follow exposed cables to a Reacting Device.
- Activate it to enable additional jump pads.
Use the pads to climb upward and regroup with Penny.
Climb Onto the Crane Arm
Strike the Reacting Device blocking the path ahead.
Turn around and use the jump pad facing the rock wall to reach the upper ledge. Cross the bridge, climb the rope, and use the final jump pad to land directly on the crane arm.
Clear the Maintenance Shaft
Run to the end of the crane arm and locate the blocked shaft.
Pick up the nearby explosive and detonate it to clear the obstruction. This unlocks access to the shaft below.
Descend using the rope to return to the control room.
Position the Crane for the Final Route
At the control panels:
- Move the crane forward once.
- Rotate it twice to align with the Deep Management Post.
The crane now forms a complete traversal path.
Defeat the Aggeloi and Finish the Quest
Climb back onto the crane and catch up with the UWST SAR Crew.
Drop down at the marked location and defeat the Aggeloi enemy group. A final interaction completes the quest and unlocks the next mission.
Super Crane Quest Rewards
Completing Fix the Super Crane grants:
- Oroberyl ×150
- T-Creds ×6,200
- Intermediate Combat Records ×24
- Protoprism ×4
- Arms INSP Kits ×18
- Valley Regional Development Metric ×200
- EXP ×400
With the crane restored, new quarry routes open and the Deep Management Post Rescue quest becomes available. The Super Crane remains a permanent traversal tool for the region, making future exploration faster and safer. Play Now!
